Syllable Forum Index Syllable
Syllable Forums
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

0.6.6 No audio under qemu/es1370

 
Post new topic   Reply to topic    Syllable Forum Index -> Bugs
View previous topic :: View next topic  
Author Message
adamk



Joined: 15 Dec 2007
Posts: 54

PostPosted: Sun Nov 09, 2008 7:53 pm    Post subject: 0.6.6 No audio under qemu/es1370 Reply with quote

When running Syllable under qemu with the "-soundhw es1370" option, audio playback doesn't seem to work at all. From the debug log it looks like Syllable detects the es1370 sound card. In the Media Preferences, I have two options for Default audio output: "Media Server - OSS (Unknown)" and "OSS (Unknown)". I do not get any audio output, though, when trying to play an mp3 or ogg file under Media Player or ColdFish. Under Media Player, I get a popup warning "File could not be opened. Please check your media settings."

[code:1]
Press any key to continue.
0 : CPU: Unknown (family 0x6 model 0x3)
0 : Multiboot memory map:
0 : 0000000000000000 - 000000000009fc00 (usable)
0 : 000000000009fc00 - 00000000000a0000 (reserved)
0 : 00000000000e8000 - 0000000000100000 (reserved)
0 : 0000000000100000 - 0000000017ff0000 (usable)
0 : 0000000017ff0000 - 0000000018000000 (ACPI data)
0 : 00000000fffc0000 - 0000000100000000 (reserved)
0 : Scan memory for ACPI SMP config tables...
0 : OEM ID: QEMU Product ID: QEMURSDT
0 : Processor #0 found
0 : I/O APIC 1 at 0xFEC00000.
0 : 1 processors found.
0 : Boot from CPU #0.
0 : Calibrating delay loop for CPU 0
0 : CPU 0 - 343.04 BogoMIPS (lpj=171520)
0 : CPU 0 runs at 3193.7256 MHz
0 : CPU 0 bus runs at 1000.5292 MHz
0 : Start init thread
0:init::init(-1) : Total of 1 processors activated (343.04 BogoMIPS).
0:init::init(-1) : Enable interrupts
0:init::init(-1) : TIME : 09-11-2008 21:58:39
0:init::init(-1) : Kernel configuration: /boot/system/config/kernel.cfg
0:init::init(-1) : IRQ 4 enabled
0:init::init(-1) : Init virtual file system
0:init::init(-1) : Volume 1 (0x001649a0) added
0:init::init(-1) : Root file system mounted 0x001649a0
0:init::init(-1) : Volume 3 (0x00164bc0) added
0:init::init(-1) : Init boot modules:
0:init::init(-1) : Init boot module '/boot/system/drivers/dev/bus/acpi'
0:init::init(-1) : Init boot module '/boot/system/drivers/dev/bus/pci'
0:init::init(-1) : Init boot module '/boot/system/drivers/dev/bus/ata'
0:init::init(-1) : Init boot module '/boot/system/drivers/dev/hcd/ata_pci'
0:init::init(-1) : Init boot module '/boot/system/drivers/fs/afs'
0:init::init(-1) : Reenabling device /boot/system/drivers/dev/acpi_cpu
0:init::init(-1) : Reenabling device /boot/system/drivers/dev/battery
0:init::init(-1) : ACPI: RSDP 000FA5E0, 0014 (r0 QEMU )
0:init::init(-1) : ACPI: RSDT 17FF0000, 002C (r0 QEMU QEMURSDT 1 QEMU 1)
0:init::init(-1) : ACPI: FACP 17FF002C, 0074 (r0 QEMU QEMUFACP 1 QEMU 1)
0:init::init(-1) : ACPI: DSDT 17FF0100, 0832 (r1 BXPC BXDSDT 1 INTL 20060912)
0:init::init(-1) : ACPI: FACS 17FF00C0, 0040
0:init::init(-1) : ACPI: APIC 17FF0938, 0040 (r0 QEMU QEMUAPIC 1 QEMU 1)
0:init::init(-1) : IRQ 11 enabled
0:init::init(-1) : ACPI: Using PIC for interrupt routing
0:init::init(-1) : ACPI: Found System \ [0xffffffff] ACPI ACPI_SYS
0:init::init(-1) : ACPI: Found Device \_SB_ [0x0058c478] _SB
0:init::init(-1) : ACPI: Found Device \_SB_.PCI0 [0x0058c658] PCI0 PNP0A03
0:init::init(-1) : ACPI: Found Device \_SB_.PCI0.ISA_ [0x0058c718] ISA
0:init::init(-1) : ACPI: Found Device \_SB_.PCI0.ISA_.KBD_ [0x0058c778] KBD PNP0303
0:init::init(-1) : ACPI: Found Device \_SB_.PCI0.ISA_.MOU_ [0x0058c7f8] MOU PNP0F13
0:init::init(-1) : ACPI: Found Device \_SB_.PCI0.ISA_.FDC0 [0x0058c878] FDC0 PNP0700
0:init::init(-1) : ACPI: Found Device \_SB_.PCI0.ISA_.LPT_ [0x0058c8f8] LPT PNP0400
0:init::init(-1) : ACPI: Found Device \_SB_.PCI0.ISA_.COM1 [0x0058c978] COM1 PNP0501
0:init::init(-1) : ACPI: Found Device \_SB_.PCI0.PX13 [0x0058cab8] PX13
0:init::init(-1) : ACPI: Found Device \_SB_.LNKA [0x0058ccb8] LNKA PNP0C0F
0:init::init(-1) : ACPI: Found Device \_SB_.LNKB [0x0058cdb8] LNKB PNP0C0F
0:init::init(-1) : ACPI: Found Device \_SB_.LNKC [0x0058ceb8] LNKC PNP0C0F
0:init::init(-1) : ACPI: Found Device \_SB_.LNKD [0x0058cfb8] LNKD PNP0C0F
0:init::init(-1) : ACPI: Found Thermal Zone \_TZ_ [0x0058c4b8] _TZ ACPI_THM
0:init::init(-1) : ACPI: S5 supported
0:init::init(-1) : ACPI: Register driver ACPI Thermal Zone Driver
0:init::init(-1) : ACPI: Register driver ACPI Fan Driver
0:init::init(-1) : ACPI: Register driver ACPI Power Resource Driver
0:init::init(-1) : ACPI: Register driver ACPI Embedded Controller Driver
0:init::init(-1) : ACPI: Register driver ACPI Button Driver
0:init::init(-1) : ACPI: Wakeup devices
0:init::init(-1) : ACPI: Busmanager initialized
0:init::init(-1) : PCI: PCIBIOS Version 2.16 detected
0:init::init(-1) : PCI: Access method 1 supported, access method 2 not supported
0:init::init(-1) : PCI: Using access method 1
0:init::init(-1) : PCI: Scanning Bus 0
0:init::init(-1) : PCI: Device 0 VendorID: 8086 DeviceID: 1237 at 0:0:0
0:init::init(-1) : PCI: Device 1 VendorID: 8086 DeviceID: 7000 at 0:1:0
0:init::init(-1) : PCI: Device 2 VendorID: 8086 DeviceID: 7010 at 0:1:1
0:init::init(-1) : PCI: Device 3 VendorID: 8086 DeviceID: 7113 at 0:1:3
0:init::init(-1) : PCI: Device 4 VendorID: 1013 DeviceID: 00b8 at 0:2:0
0:init::init(-1) : PCI: Device 5 VendorID: 10ec DeviceID: 8029 at 0:3:0
0:init::init(-1) : PCI: Device 6 VendorID: 1274 DeviceID: 5000 at 0:4:0
0:init::init(-1) : PCI: Scan of bus finished
0:init::init(-1) : PCI: 7 devices detected
0:init::init(-1) : ACPI: Register driver ACPI PCI Interrupt Link Driver
0:init::init(-1) : PCI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
0:init::init(-1) : PCI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12)
0:init::init(-1) : PCI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12)
0:init::init(-1) : PCI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12)
0:init::init(-1) : ACPI: Register driver ACPI PCI Root Bridge Driver
0:init::init(-1) : PCI: [PCI0] (00:00)
0:init::init(-1) : PCI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
0:init::init(-1) : PCI: Routing Table Entry 0:0 Pin 0
0:init::init(-1) : Connected to link: \_SB_.LNKD:0
0:init::init(-1) : PCI: Routing Table Entry 0:0 Pin 1
0:init::init(-1) : Connected to link: \_SB_.LNKA:0
0:init::init(-1) : PCI: Routing Table Entry 0:0 Pin 2
0:init::init(-1) : Connected to link: \_SB_.LNKB:0
0:init::init(-1) : PCI: Routing Table Entry 0:0 Pin 3
0:init::init(-1) : Connected to link: \_SB_.LNKC:0
0:init::init(-1) : PCI: Routing Table Entry 0:1 Pin 0
0:init::init(-1) : Connected to link: \_SB_.LNKA:0
0:init::init(-1) : PCI: Routing Table Entry 0:1 Pin 1
0:init::init(-1) : Connected to link: \_SB_.LNKB:0
0:init::init(-1) : PCI: Routing Table Entry 0:1 Pin 2
0:init::init(-1) : Connected to link: \_SB_.LNKC:0
0:init::init(-1) : PCI: Routing Table Entry 0:1 Pin 3
0:init::init(-1) : Connected to link: \_SB_.LNKD:0
0:init::init(-1) : PCI: Routing Table Entry 0:2 Pin 0
0:init::init(-1) : Connected to link: \_SB_.LNKB:0
0:init::init(-1) : PCI: Routing Table Entry 0:2 Pin 1
0:init::init(-1) : Connected to link: \_SB_.LNKC:0
0:init::init(-1) : PCI: Routing Table Entry 0:2 Pin 2
0:init::init(-1) : Connected to link: \_SB_.LNKD:0
0:init::init(-1) : PCI: Routing Table Entry 0:2 Pin 3
0:init::init(-1) : Connected to link: \_SB_.LNKA:0
0:init::init(-1) : PCI: Routing Table Entry 0:3 Pin 0
0:init::init(-1) : Connected to link: \_SB_.LNKC:0
0:init::init(-1) : PCI: Routing Table Entry 0:3 Pin 1
0:init::init(-1) : Connected to link: \_SB_.LNKD:0
0:init::init(-1) : PCI: Routing Table Entry 0:3 Pin 2
0:init::init(-1) : Connected to link: \_SB_.LNKA:0
0:init::init(-1) : PCI: Routing Table Entry 0:3 Pin 3
0:init::init(-1) : Connected to link: \_SB_.LNKB:0
0:init::init(-1) : PCI: Routing Table Entry 0:4 Pin 0
0:init::init(-1) : Connected to link: \_SB_.LNKD:0
0:init::init(-1) : PCI: Routing Table Entry 0:4 Pin 1
0:init::init(-1) : Connected to link: \_SB_.LNKA:0
0:init::init(-1) : PCI: Routing Table Entry 0:4 Pin 2
0:init::init(-1) : Connected to link: \_SB_.LNKB:0
0:init::init(-1) : PCI: Routing Table Entry 0:4 Pin 3
0:init::init(-1) : Connected to link: \_SB_.LNKC:0
0:init::init(-1) : PCI: Routing Table Entry 0:5 Pin 0
0:init::init(-1) : Connected to link: \_SB_.LNKA:0
0:init::init(-1) : PCI: Routing Table Entry 0:5 Pin 1
0:init::init(-1) : Connected to link: \_SB_.LNKB:0
0:init::init(-1) : PCI: Routing Table Entry 0:5 Pin 2
0:init::init(-1) : Connected to link: \_SB_.LNKC:0
0:init::init(-1) : PCI: Routing Table Entry 0:5 Pin 3
0:init::init(-1) : Connected to link: \_SB_.LNKD:0
0:init::init(-1) : PCI: Device 0x8086:0x1237 has no interrupt pin
0:init::init(-1) : PCI: Device 0x8086:0x7000 has no interrupt pin
0:init::init(-1) : PCI: Device 0x8086:0x7010 has no interrupt pin
0:init::init(-1) : PCI: PCI Interrupt Link [LNKA] enabled at IRQ 11
0:init::init(-1) : PCI: Device 0x8086:0x7113 IRQ transform 11 -> 11
0:init::init(-1) : PCI: Device 0x1013:0xb8 has no interrupt pin
0:init::init(-1) : PCI: PCI Interrupt Link [LNKC] enabled at IRQ 11
0:init::init(-1) : PCI: Device 0x10ec:0x8029 IRQ transform 11 -> 11
0:init::init(-1) : PCI: PCI Interrupt Link [LNKD] enabled at IRQ 9
0:init::init(-1) : PCI: Device 0x1274:0x5000 IRQ transform 9 -> 9
0:init::init(-1) : ATA busmanager initialized
0:init::init(-1) : ATA PCI controller detected on 0:1:1
0:init::init(-1) : Controller enabled by driver
0:init::init(-1) : Controller in legacy mode
0:init::init(-1) : Channel 0: PIO Cmd @ 1f0 Ctrl @ 3f6 DMA @ c000 IRQ @ 14
0:init::init(-1) : Channel 1: PIO Cmd @ 170 Ctrl @ 376 DMA @ c008 IRQ @ 15
0:init::init(-1) : IRQ 14 enabled
0:init::init(-1) : IRQ 15 enabled
0:init::init(-1) : Intel PIIX3 controller detected
dbg>0:init::init(-1) : Detected 1 ATA PCI controllers
0:init::init(-1) : ATA device connected on 40pin cable
0:init::init(-1) : Name: QEMU HARDDISK (hda)
0:init::init(-1) : Modes: PIO MWDMA ( 0 1 2 ) UDMA ( 0 1 2 3 4 5 )
0:init::init(-1) : Capacity: 81964 Mb
0:init::init(-1) : No device connected on port 0:1 (not present)
0:init::init(-1) : ATAPI device connected on 40pin cable
0:init::init(-1) : ATAPI CD-ROM/DVD-ROM connected on 40pin cable
0:init::init(-1) : Name: QEMU CD-ROM (cdc)
0:init::init(-1) : Modes: PIO ( 3 4 5 ) MWDMA ( 0 1 2 ) UDMA ( 0 1 2 3 4 5 )
0:init::init(-1) : No device connected on port 1:1 (not present)
0:init::init(-1) : QEMU HARDDISK: Using Multiword DMA mode 2
0:init::init(-1) : QEMU CD-ROM: Using Multiword DMA mode 2
0:init::init(-1) : Decode partition table for hda
0:init::init(-1) : Partition 0 : 32256 -> 2048385023 06 (2048352768)
0:init::init(-1) : Partition 1 : 2048385024 -> 12048777215 83 (10000392192)
0:init::init(-1) : Partition 2 : 12048777216 -> 16343760383 2a (4294983168)
0:init::init(-1) : Mount boot FS: /dev/disk/ata/hda/2 afs
0:init::init(-1) : initialize_fs called in afs
0:init::init(-1) : Mount afs on '/dev/disk/ata/hda/2' flags 00000000
0:init::init(-1) : Load super block
0:init::init(-1) : Validate super block
0:init::init(-1) : Log start: 547 BitmapStart : 34
0:init::init(-1) : afs_mount() : filesystem has 3926680 free blocks (of 4194319)
0:init::init(-1) : AFS filesystem successfully mounted
0:init::init(-1) : ACPI: Register driver ACPI Processor Driver
0:init::init(-1) : Disabling device /boot/system/drivers/dev/acpi_cpu on bus acpi
0:init::init(-1) : Error: device /boot/system/drivers/dev/acpi_cpu failed to initialize itself
0:init::init(-1) : ACPI: Register driver ACPI Battery Driver
0:init::init(-1) : Disabling device /boot/system/drivers/dev/battery on bus acpi
0:init::init(-1) : Error: device /boot/system/drivers/dev/battery failed to initialize itself
0:init::init(-1) : PS2 keyboard and mouse driver
0:init::init(-1) : PS2 or AT Keyboard detected
0:init::init(-1) : PS2 AUX port detected
0:init::init(-1) : AGP: Busmanager initialized
0:init::init(-1) : SCSI: Busmanager initialized
0:init::init(-1) : USB: Busmanager initialized
0:init::init(-1) : USB: USB HUB driver registered
0:init::init(-1) : No USB EHCI 2.0 controller found
0:init::init(-1) : Error: device /boot/system/drivers/dev/hcd/usb_ehci failed to initialize itself
0:init::init(-1) : Device /boot/system/drivers/dev/hcd/usb_ohci on bus pci is disabled
0:init::init(-1) : Device /boot/system/drivers/dev/hcd/usb_uhci on bus pci is disabled
0:init::init(-1) : Volume 5 (0x00164ec0) added
0:init::init(-1) : 3c509.c:0.51 October 9, 2000
0:init::init(-1) : ***NO 3c509 CARD FOUND***
0:init::init(-1) : Error: device /boot/system/drivers/dev/net/eth/3c509 failed to initialize itself
0:init::init(-1) : Error: device /boot/system/drivers/dev/net/eth/3c59x failed to initialize itself
0:init::init(-1) : Info: ne.c: PCI BIOS reports Realtek 8029 at i/o 0xc100, irq 11.
0:init::init(-1) : Ethernet addr: 52 54 00 12 34 56
0:init::init(-1) : Nx000_drv: NE2000 found at 0xc100, using IRQ 11.
0:init::init(-1) : Device /boot/system/drivers/dev/net/eth/dl2k on bus pci is disabled
0:init::init(-1) : Device /boot/system/drivers/dev/net/eth/dp83815 on bus pci is disabled
0:init::init(-1) : Device /boot/system/drivers/dev/net/eth/eepro100 on bus pci is disabled
0:init::init(-1) : Device /boot/system/drivers/dev/net/eth/forcedeth on bus pci is disabled
0:init::init(-1) : Device /boot/system/drivers/dev/net/eth/pcnet32 on bus pci is disabled
0:init::init(-1) : Device /boot/system/drivers/dev/net/eth/r8169 on bus pci is disabled
0:init::init(-1) : Device /boot/system/drivers/dev/net/eth/rtl8139 on bus pci is disabled
0:init::init(-1) : Device /boot/system/drivers/dev/net/eth/sis900 on bus pci is disabled
0:init::init(-1) : Device /boot/system/drivers/dev/net/eth/skge on bus pci is disabled
0:init::init(-1) : Device /boot/system/drivers/dev/net/eth/tg3 on bus pci is disabled
0:init::init(-1) : Device /boot/system/drivers/dev/net/eth/tulip on bus pci is disabled
0:init::init(-1) : Device /boot/system/drivers/dev/net/eth/via on bus pci is disabled
0:init::init(-1) : Start init host
0:boot-shell::boot-shell(-1) : Starting init...
0:sh::sh : Device /boot/system/drivers/dev/acpi_cpu on bus acpi is disabled
0:sh::sh : Device /boot/system/drivers/dev/battery on bus acpi is disabled
0:appserver::appserver : Appserver Alive 16
0:ls::ls : Device /boot/system/drivers/dev/acpi_cpu on bus acpi is disabled
0:ls::ls : Device /boot/system/drivers/dev/battery on bus acpi is disabled
0:appserver::appserver : Directory '/system/fonts/' scanned 92 fonts found
0:appserver::appserver : Load configuration
0:appserver::appserver : Start keyboard thread
0:appserver::appserver : Load default fonts
0:appserver::appserver : Initialise graphics driver...
0:appserver::appserver : Device /boot/system/drivers/dev/acpi_cpu on bus acpi is disabled
0:appserver::appserver : Device /boot/system/drivers/dev/battery on bus acpi is disabled
0:appserver::appserver : Device /boot/system/drivers/dev/graphics/geforcefx on bus pci is disabled
0:appserver::appserver : Device /boot/system/drivers/dev/graphics/i855 on bus pci is disabled
0:appserver::appserver : Device /boot/system/drivers/dev/graphics/mach64 on bus pci is disabled
0:appserver::appserver : Device /boot/system/drivers/dev/graphics/mga on bus pci is disabled
0:appserver::appserver : Device /boot/system/drivers/dev/graphics/radeon on bus pci is disabled
0:appserver::appserver : Device /boot/system/drivers/dev/graphics/riva on bus pci is disabled
0:appserver::appserver : Device /boot/system/drivers/dev/graphics/s3_chrome on bus pci is disabled
0:appserver::appserver : Device /boot/system/drivers/dev/graphics/s3_virge on bus pci is disabled
0:appserver::appserver : Device /boot/system/drivers/dev/graphics/savage on bus pci is disabled
0:appserver::appserver : Device /boot/system/drivers/dev/graphics/sis3xx on bus pci is disabled
0:appserver::appserver : Device /boot/system/drivers/dev/graphics/tdfx on bus pci is disabled
0:appserver::appserver : Error: device /boot/system/drivers/dev/graphics/trident failed to initialize itself
0:appserver::appserver : Device /boot/system/drivers/dev/graphics/vmware on bus pci is disabled
0:appserver::appserver : Falling back to VESA 2.0 driver
0:appserver::appserver : Found total of 15 VESA modes. Valid: 8, Paged: 0, Planar: 0, Bad: 7
0:appserver::appserver : Warning: DisplayDriver::MouseOn() called while mouse visible
0:appserver::appserver : Probe input node keyboard
0:appserver::appserver : ps2_open()
0:appserver::appserver : IRQ 1 enabled
0:appserver::appserver : Probe input node ps2mouse
0:appserver::appserver : Serial device: device_init() called
0:appserver::appserver : Serial device failed to install IRQ handler
0:appserver::appserver : Error: device /boot/system/drivers/dev/misc/serial failed to initialize itself
0:appserver::appserver : w8378x>init_driver()
0:appserver::appserver : w8378x>init_driver(): could not find hardware
0:appserver::appserver : Error: device /boot/system/drivers/dev/misc/w8378x failed to initialize itself
0:appserver::appserver : ps2_open()
0:appserver::appserver : IRQ 12 enabled
0:appserver::appserver : IMPS2 mouse detected.
0:appserver::appserver : Probe input node sermouse
0:appserver::appserver : Error: serial mode driver failed to open serial device: No such file or directory
0:appserver::appserver : Input node sermouse failed to initialize
0:appserver::appserver : Probe input node usbkeyboard
0:appserver::appserver : USB: USB hid driver registered
0:appserver::appserver : Probe input node usbmouse
0:appserver::appserver : Found USB mouse device node
0:mediaserver::mediaserver : Device /boot/system/drivers/dev/audio/emu10k1 on bus pci is disabled
0:mediaserver::mediaserver : Ensoniq 1370 driver
0:mediaserver::mediaserver : IRQ 9 enabled
0:mediaserver::mediaserver : found es1370 at io 0xc200 irq 9
0:mediaserver::mediaserver : Found!
0:mediaserver::mediaserver : Device /boot/system/drivers/dev/audio/es1371 on bus pci is disabled
0:mediaserver::mediaserver : Device /boot/system/drivers/dev/audio/hda on bus pci is disabled
0:mediaserver::mediaserver : Device /boot/system/drivers/dev/audio/i8xx on bus pci is disabled
0:mediaserver::mediaserver : Device /boot/system/drivers/dev/audio/maestro on bus pci is disabled
No changes detected to network hardware.
0:registrar::registrar : Registrar running at port 0
0:mediaserver::mediaserver : device_init: Initializing device
0:mediaserver::mediaserver : sb_dsp_init: Initializing SBPro dsp.
0:mediaserver::mediaserver : sb_dsp_reset: Resetting device.
0:mediaserver::mediaserver : sb_dsp_reset: Reset failed.
0:mediaserver::mediaserver : sb_dsp_init: SoundBlaster card not found.
0:mediaserver::mediaserver : device_init: Failed to create 1 node -1
0:mediaserver::mediaserver : Error: device /boot/system/drivers/dev/audio/sbpro failed to initialize itself
0:mediaserver::mediaserver : Device /boot/system/drivers/dev/audio/trident on bus pci is disabled
0:mediaserver::mediaserver : Device /boot/system/drivers/dev/audio/via686a on bus pci is disabled
0:mediaserver::mediaserver : Device /boot/system/drivers/dev/audio/vt82xx on bus pci is disabled
0:mediaserver::mediaserver : Device /boot/system/drivers/dev/audio/ymfpci on bus pci is disabled
0:mediaserver::mediaserver : Device /boot/system/drivers/dev/acpi_cpu on bus acpi is disabled
0:mediaserver::mediaserver : Device /boot/system/drivers/dev/battery on bus acpi is disabled
0:mediaserver::mediaserver : es1370_open: 0x02301c00
0:mediaserver::mediaserver : es1370_open: EXIT
0:mediaserver::mediaserver : es1370_ioctl: ENTER, Command: 1342179584
0:mediaserver::mediaserver : es1370_release
0:dhcpc::dhcpc : 3c509.c:0.51 October 9, 2000
0:dhcpc::dhcpc : ***NO 3c509 CARD FOUND***
0:dhcpc::dhcpc : Error: device /boot/system/drivers/dev/net/eth/3c509 failed to initialize itself
0:dhcpc::dhcpc : Error: device /boot/system/drivers/dev/net/eth/3c59x failed to initialize itself
0:dhcpc::dhcpc : Device /boot/system/drivers/dev/net/eth/dl2k on bus pci is disabled
0:dhcpc::dhcpc : Device /boot/system/drivers/dev/net/eth/dp83815 on bus pci is disabled
0:dhcpc::dhcpc : Device /boot/system/drivers/dev/net/eth/eepro100 on bus pci is disabled
0:dhcpc::dhcpc : Device /boot/system/drivers/dev/net/eth/forcedeth on bus pci is disabled
0:dhcpc::dhcpc : Device /boot/system/drivers/dev/net/eth/pcnet32 on bus pci is disabled
0:dhcpc::dhcpc : Device /boot/system/drivers/dev/net/eth/r8169 on bus pci is disabled
0:dhcpc::dhcpc : Device /boot/system/drivers/dev/net/eth/rtl8139 on bus pci is disabled
0:dhcpc::dhcpc : Device /boot/system/drivers/dev/net/eth/sis900 on bus pci is disabled
0:dhcpc::dhcpc : Device /boot/system/drivers/dev/net/eth/skge on bus pci is disabled
0:dhcpc::dhcpc : Device /boot/system/drivers/dev/net/eth/tg3 on bus pci is disabled
0:dhcpc::dhcpc : Device /boot/system/drivers/dev/net/eth/tulip on bus pci is disabled
0:dhcpc::dhcpc : Device /boot/system/drivers/dev/net/eth/via on bus pci is disabled
0:ls::ls : Device /boot/system/drivers/dev/acpi_cpu on bus acpi is disabled
0:ls::ls : Device /boot/system/drivers/dev/battery on bus acpi is disabled
0:cupsd::cupsd : Device /boot/system/drivers/dev/acpi_cpu on bus acpi is disabled
0:cupsd::cupsd : Device /boot/system/drivers/dev/battery on bus acpi is disabled
0:sh-host::sh-host(-1) : ... boot shell finished
0:appserver::ps2mouse_event_thread : Mouse out of sync. Switching protocol to: 2
0:Dock::dock_win : Device /boot/system/drivers/dev/acpi_cpu on bus acpi is disabled
0:Dock::dock_win : Device /boot/system/drivers/dev/battery on bus acpi is disabled
0:Dock::dock_win : Serial device: device_init() called
0:Dock::dock_win : Serial device failed to install IRQ handler
0:Dock::dock_win : Error: device /boot/system/drivers/dev/misc/serial failed to initialize itself
0:Dock::dock_win : w8378x>init_driver()
0:Dock::dock_win : w8378x>init_driver(): could not find hardware
0:Dock::dock_win : Error: device /boot/system/drivers/dev/misc/w8378x failed to initialize itself
0:MediaPlayer::MediaPlayer : Device /boot/system/drivers/dev/acpi_cpu on bus acpi is disabled
0:MediaPlayer::MediaPlayer : Device /boot/system/drivers/dev/battery on bus acpi is disabled
0:MediaPlayer::MediaPlayer : Scan for floppy-drives exported by bios:
0:MediaPlayer::MediaPlayer : Scan for hard-drives exported by bios:
0:MediaPlayer::MediaPlayer : USB: USB disk driver registered
0:MediaPlayer::MediaPlayer : USB disk driver loaded
0:MediaPlayer::MediaPlayer : es1370_open: 0x02301c00
0:MediaPlayer::MediaPlayer : es1370_open: EXIT
0:MediaPlayer::MediaPlayer : es1370_ioctl: ENTER, Command: 1342179584
0:MediaPlayer::MediaPlayer : es1370_release
0:MediaPlayer::MediaPlayer : Device /boot/system/drivers/dev/acpi_cpu on bus acpi is disabled
0:MediaPlayer::MediaPlayer : Device /boot/system/drivers/dev/battery on bus acpi is disabled
0:MediaPlayer::MediaPlayer : Device /boot/system/drivers/dev/audio/emu10k1 on bus pci is disabled
0:MediaPlayer::MediaPlayer : Device /boot/system/drivers/dev/audio/es1371 on bus pci is disabled
0:MediaPlayer::MediaPlayer : Device /boot/system/drivers/dev/audio/hda on bus pci is disabled
0:MediaPlayer::MediaPlayer : Device /boot/system/drivers/dev/audio/i8xx on bus pci is disabled
0:MediaPlayer::MediaPlayer : Device /boot/system/drivers/dev/audio/maestro on bus pci is disabled
0:MediaPlayer::MediaPlayer : device_init: Initializing device
0:MediaPlayer::MediaPlayer : sb_dsp_init: Initializing SBPro dsp.
0:MediaPlayer::MediaPlayer : sb_dsp_reset: Resetting device.
0:MediaPlayer::MediaPlayer : sb_dsp_reset: Reset failed.
0:MediaPlayer::MediaPlayer : sb_dsp_init: SoundBlaster card not found.
0:MediaPlayer::MediaPlayer : device_init: Failed to create 1 node -1
0:MediaPlayer::MediaPlayer : Error: device /boot/system/drivers/dev/audio/sbpro failed to initialize itself
0:MediaPlayer::MediaPlayer : Device /boot/system/drivers/dev/audio/trident on bus pci is disabled
0:MediaPlayer::MediaPlayer : Device /boot/system/drivers/dev/audio/via686a on bus pci is disabled
0:MediaPlayer::MediaPlayer : Device /boot/system/drivers/dev/audio/vt82xx on bus pci is disabled
0:MediaPlayer::MediaPlayer : Device /boot/system/drivers/dev/audio/ymfpci on bus pci is disabled
0:MediaPlayer::alert_window : Error: Invoker registered with this Alert requester does not have a message!
0:MediaPlayer::MediaPlayer : Device /boot/system/drivers/dev/acpi_cpu on bus acpi is disabled
0:MediaPlayer::MediaPlayer : Device /boot/system/drivers/dev/battery on bus acpi is disabled
0:MediaPlayer::MediaPlayer : Device /boot/system/drivers/dev/audio/emu10k1 on bus pci is disabled
0:MediaPlayer::MediaPlayer : Device /boot/system/drivers/dev/audio/es1371 on bus pci is disabled
0:MediaPlayer::MediaPlayer : Device /boot/system/drivers/dev/audio/hda on bus pci is disabled
0:MediaPlayer::MediaPlayer : Device /boot/system/drivers/dev/audio/i8xx on bus pci is disabled
0:MediaPlayer::MediaPlayer : Device /boot/system/drivers/dev/audio/maestro on bus pci is disabled
0:MediaPlayer::MediaPlayer : device_init: Initializing device
0:MediaPlayer::MediaPlayer : sb_dsp_init: Initializing SBPro dsp.
0:MediaPlayer::MediaPlayer : sb_dsp_reset: Resetting device.
0:MediaPlayer::MediaPlayer : sb_dsp_reset: Reset failed.
0:MediaPlayer::MediaPlayer : sb_dsp_init: SoundBlaster card not found.
0:MediaPlayer::MediaPlayer : device_init: Failed to create 1 node -1
0:MediaPlayer::MediaPlayer : Error: device /boot/system/drivers/dev/audio/sbpro failed to initialize itself
0:MediaPlayer::MediaPlayer : Device /boot/system/drivers/dev/audio/trident on bus pci is disabled
0:MediaPlayer::MediaPlayer : Device /boot/system/drivers/dev/audio/via686a on bus pci is disabled
0:MediaPlayer::MediaPlayer : Device /boot/system/drivers/dev/audio/vt82xx on bus pci is disabled
0:MediaPlayer::MediaPlayer : Device /boot/system/drivers/dev/audio/ymfpci on bus pci is disabled
0:MediaPlayer::alert_window : Error: Invoker registered with this Alert requester does not have a message!
0:Terminal::Terminal : Device /boot/system/drivers/dev/acpi_cpu on bus acpi is disabled
0:Terminal::Terminal : Device /boot/system/drivers/dev/battery on bus acpi is disabled
0:ls::ls : Device /boot/system/drivers/dev/acpi_cpu on bus acpi is disabled
0:ls::ls : Device /boot/system/drivers/dev/battery on bus acpi is disabled
0:appserver::close_thread : Closing application/x-vnd.KHS-aterm ...
0:appserver::app_thread : Application application/x-vnd.KHS-aterm forgot to delete 1 fonts!
0:appserver::app_thread : Application application/x-vnd.KHS-aterm forgot to delete 1 bitmaps!
[/code:1]
Back to top
View user's profile Send private message
Kaj
The Knights of Syllable


Joined: 14 Sep 2007
Posts: 2020
Location: Friesland

PostPosted: Sun Nov 09, 2008 9:36 pm    Post subject: Reply with quote

Sounds like you did not activate the Media Preferences settings?
Back to top
View user's profile Send private message Visit poster's website
adamk



Joined: 15 Dec 2007
Posts: 54

PostPosted: Mon Nov 10, 2008 3:38 pm    Post subject: Reply with quote

Maybe I'm missing something, but how do I do that? In the media preferences, if I select "Media Server - OSS (unknown)" I get told "This output has no controls". If I select "OSS (Unknown)", that message goes away but I still have no controls Smile
Back to top
View user's profile Send private message
adamk



Joined: 15 Dec 2007
Posts: 54

PostPosted: Mon Nov 10, 2008 3:56 pm    Post subject: Reply with quote

So here we go... Hopefully useful debug output Smile

[code:1]
0:mediaserver::mediaserver : es1370_open: 0x0240160c
0:mediaserver::mediaserver : es1370_open: EXIT
0:mediaserver::mediaserver : es1370_ioctl: ENTER, Command: 3221504002
0:mediaserver::mediaserver : es1370_ioctl: ENTER, Command: 3221504005
0:mediaserver::mediaserver : es1370_ioctl: ENTER, Command: 3221504003
0:mediaserver::mediaserver : es1370_ioctl: ENTER, Command: 1074806796
0:mediaserver::mediaserver : SNDCTL_DSP_GETOSPACE: No implemented
0:mediaserver::media_server_flush : es1370_ioctl: ENTER, Command: 1074020375
0:mediaserver::media_server_flush : SNDCTL_DSP_GETODELAY: No implemented
0:mediaserver::media_server_flush : es1370_ioctl: ENTER, Command: 1074020375
0:mediaserver::media_server_flush : SNDCTL_DSP_GETODELAY: No implemented
0:mediaserver::media_server_flush : es1370_ioctl: ENTER, Command: 1074020375
[/code:1]

And so on Smile

Adam
Back to top
View user's profile Send private message
Kaj
The Knights of Syllable


Joined: 14 Sep 2007
Posts: 2020
Location: Friesland

PostPosted: Mon Nov 10, 2008 5:24 pm    Post subject: Reply with quote

I can see how this would be confusing. Smile Having no controls in the Media Preferences applet is of no consequence. What matters is applying the choice of sound output. The errors in the kernel log, however, point out unimplemented I/O controls in the sound driver.

Actually, I was looking for an old bug report with this error, but couldn't find it. This is a symptom that occurred when we upgraded our audio framework and still needs to be fixed in a few drivers. I hope that can be done before Syllable 0.6.6.
Back to top
View user's profile Send private message Visit poster's website
adamk



Joined: 15 Dec 2007
Posts: 54

PostPosted: Tue Nov 11, 2008 5:00 am    Post subject: Reply with quote

I probably mentioned that same problem after the 0.6.5 release when I tried Syllable under vmware Smile Not sure if I filed a bug report at that time, but I remember you (or one of the devs) were frustrated that despite all the users who had tried Syllable under vmware, no one had reported this problem Smile

Adam
Back to top
View user's profile Send private message
Kaj
The Knights of Syllable


Joined: 14 Sep 2007
Posts: 2020
Location: Friesland

PostPosted: Tue Nov 11, 2008 5:33 am    Post subject: Reply with quote

Yep, that's the one. So thanks for the report, again. Smile
Back to top
View user's profile Send private message Visit poster's website
adamk



Joined: 15 Dec 2007
Posts: 54

PostPosted: Wed Aug 19, 2009 6:40 pm    Post subject: Reply with quote

FYI, I am still getting these errors under the July 1st development build:

0:mediaserver::media_server_flush : es1370_ioctl: ENTER, Command: 1074020375
0:mediaserver::media_server_flush : SNDCTL_DSP_GETODELAY: No implemented
0:mediaserver::media_server_flush : es1370_ioctl: ENTER, Command: 1074020375
0:mediaserver::media_server_flush : SNDCTL_DSP_GETODELAY: No implemented
0:mediaserver::media_server_flush : es1370_ioctl: ENTER, Command: 1074020375
0:mediaserver::media_server_flush : SNDCTL_DSP_GETODELAY: No implemented

This is on qemu 0.10.6.
Back to top
View user's profile Send private message
Kaj
The Knights of Syllable


Joined: 14 Sep 2007
Posts: 2020
Location: Friesland

PostPosted: Wed Aug 19, 2009 7:30 pm    Post subject: Reply with quote

Unfortunately, nobody has stepped forward to fix this bug yet. As far as I know, it's in several audio drivers. Anyone want to have a go at this limited problem that would be very useful to fix? I can't believe nobody is interested in a rare opportunity to do modern system development.
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    Syllable Forum Index -> Bugs All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group